{
  "HAPI": "3.2",
  "x_description": "This file contains a brief analysis of a STAFF-SC in-flight calibration sequence. In operation, the calibration mode is performed at least once per orbit and depending on telemetry cadence. Normal mode (NBR) is most often used. It consists of sending a known current into the sensor loops of each axis. The sequence consists of 23 steps described in the Staff Status file. Step duration depends on NBR or HBR mode. The comparison between the most significant step measurements and the ground reference values is listed here. An anomaly message is generated each time a measurement step has values that differ by 50% of the reference value for magnetic component and 30 degrees for phase between magnetic sensors. The files are stored in a non-standard ASCII format. The filename indicates the span of the calibration sequence. START and END of CALIBRATION SEQUENCE as YYYYMMDD_HHMMSS_YYYYMMDD_HHMMSS Each IFCReport file has an introductory comment line that starts with a semicolon (;). The comment line contains the parameters that have been used when running the calibration program. See Staff CR/UG for a complete description.",
  "cadence": "PTS",
  "parameters": [
    {
      "type": "isotime",
      "units": "UTC",
      "name": "time_tags",
      "description": "UT Time, time of centre of the spine",
      "label": "Universal Time",
      "length": 29,
      "fill": null
    }
  ],
  "startDate": "2000-09-05T23:00Z",
  "stopDate": "2024-07-12T09:00Z",
  "x_tap_url": "https://csa.esac.esa.int/csa-sl-tap/data?retrieval_type=HEADER&DATASET_ID=C2_CE_STA_IFCReport&FORCEPACK=false",
  "x_tap_data_url": "https://csa.esac.esa.int/csa-sl-tap/data?RETRIEVAL_TYPE=product&RETRIEVAL_ACCESS=streamed&DATASET_ID=C2_CE_STA_IFCReport&START_DATE=2024-07-12T09:00Z&END_DATE=2024-07-12T09:00Z",
  "status": {
    "code": 1200,
    "message": "OK"
  },
  "x_LastUpdate": "2026-04-12T15:14:32Z"
}